Xantrex Link 20 battery shunt assembly. (This was installed a few years ago.)
Saturday, February 09 2008 @ 04:51 PM EST
0 Comments
Views 3435
Aft part of battery 1. (200 Ah AGM 4D). Note 300A ANL fuse in battery return connection. The wiring looks a bit messy but everything is safely spaced and insulated.
Sunday, July 06 2008 @ 04:02 PM EDT
0 Comments
Views 3320
Top view of starting battery and forward part of battery 1 (200 Ah AGM 4D).
Sunday, July 06 2008 @ 04:02 PM EDT
1 Comments
Views 3476
Starting battery (92 Ah AGM group 27) installed with Blue Sea 7600 Auto Charge Relay from battery 1 to battery 2.
Sunday, July 06 2008 @ 04:02 PM EDT
0 Comments
Views 4328
Starting battery bracket glassed in place. (Cardboard spacer was removed when epoxy was cured.)
Sunday, December 02 2007 @ 03:14 PM EST
0 Comments
Views 3386
Starting battery bracket and mount installed for fit check prior to glassing.
Sunday, December 02 2007 @ 02:34 PM EST
0 Comments
Views 3604
Group 27 starting battery bracket made of teak. (Shown inverted prior to installation.)
Sunday, December 02 2007 @ 02:35 PM EST
0 Comments
Views 3141
AC Wiring Diagram with battery charger / inverter. AC wiring from inverter output back to distribution is actually 14 AWG, not 12 AWG.
Sunday, November 16 2008 @ 01:33 PM EST
0 Comments
Views 5497
DC Wiring Diagram with starting battery and inverter / charger.
