Inverter connections to Battery
I ran a 1awg wire from battery to the positive buss then I ran #2 wire to a 150A Breaker to switch power on an off. I wanted to make sure I isolated the battery from a direct connection to the inverter by using a heavy #1 wire. The MRBF is just to protect against short circuit current just to be save.
Share It!
Media Properties
Media ID | 2014052310313981 |
Date | Thursday, May 22 2014 @ 05:31 PM EDT |
Comments | 0 |
Views | 2674 |
Uploaded By | Dan Jensen |